16
Device Pairing
The Display Unit will automatically scan and connect to the Infant
Oximeter Module from the same starter kit. If the connection is not
established automatically, press “PAIR” button on the MAIN screen of the
Display Unit to force the system to pair.
NOTE: The Bluetooth connection status icon will turn blue
once the Display Unit is paired with the Infant Oximeter
Module.
NOTE: The Infant Oximeter Module must be placed within 10 meters
(32.8 feet) from the Display Unit.
Use the following procedure to switch among Infant Oximeter Modules
and establish a connection between the Display Unit and the desired
Infant Oximeter Module.
1. Ensure the desired Infant Oximeter Module is turned on.
NOTE: The desired Infant Oximeter Module must be placed within 10
meters (32.8 feet) from the Display Unit.
NOTE: The power LED lights green when the power is ON.
2.
In the settings menu, select “Sensor Pairing”.
3. Scan the QR Code located on the back of the desired Infant Oximeter
Module.
4.
Press “CONFIRM” if the serial number (SN) displayed matches with
the SN on the back of the desired Infant Oximeter Module.
5. To confirm that the process was successful, ensure that the Bluetooth
connection status icon on the MAIN screen of the Display Unit is lit
blue.
NOTE: After the Display Unit is paired to a Infant Oximeter Module, it
will
remain paired until the above process is repeated.
