1
1
B
1
1
2
5
6
7
8
8
9
10
11
8
8
9
10
11
3
4
C
26Nm/19ft-lb
26Nm/19ft-lb
100Nm/74ft-lb
A
1
1
EUROPE: +44 (0) 1451 861 562 AUSTRALIA: +61 (0) 7 3274 2077 USA: (+1) 844 287 6300
ENGLISH
For warranty purposes this product MUST be registered with Auger Torque within
14 days of purchase by the end user.
MOUNTING - HITCH FITTING
There are two types of Pin for fitting the hood to the Mounting Hitch (1):
The
Threaded Mounting Pin
(item 2, Fig B) has a locating plate with a hole that fits over a peg in the hood ear. Align the Pin
holes, fit the Pin (2), washer (3) and nylon insert nut (4) and torque to 100Nm/74ft-lb.
To fit the
Through-Bolted Mounting Pin
(item 5, Fig C), align the Pin holes and push the Pin (5) fully home taking care to
line up the Through Bolt holes. At both ends of the Pin fit the Through Bolts (6) and Nylon Insert Nuts (7) and tighten to
26Nm/19ft-lb.
Single Pin Hitch
NOTE:
The single Pin Hitch
CANNOT
be fitted to a quick Hitch.
Set the Earth Drill unit horizontally, with the output shaft towards the parent machine as in Fig A.
Fitting to the parent machine is with through-bolted Pins in all cases:
Align the Pin holes of the mounting Hitch (1) and parent machine.
Align bolt location holes fit spacers (8) if required to centralise the Hitch.
Push the Pin (9) fully home, taking care to line up the Through Bolt holes.
Fit the Through Bolts (10) and Nylon Insert Nuts (11) and tighten
to 26Nm/19ft-lb.
Once fitted, check the Earth Drill swings freely in all directions.
Double Pin and Double Pin Cradle Hitch
There are two types of Pin for fitting the Mounting Hitch (1) to the Parent Machine:
To attach a
Linch Pin
fitting (item 8, Fig B), align the Pin holes, push the Pin (8) fully home and fit the linch Pin (9).
To fit the
Through-Bolted Mounting Pin
(10, Fig C), align the Pin holes and push the Pin (10) fully home taking care to line up
the Through Bolt holes, fit the Through Bolts (11) and Nylon Insert Nuts (12) and tighten to 26Nm/19ft-lb.
99-95200025 - ISSUE 1-0
EARTH DRILL
QUICK START GUIDE
This Auger Torque quick start guide will enable you to get your new product up and running
in no time. The complete operators manual is available on the Auger Torque website.
To download a copy in pdf format, simply scan the QR code or visit www.augertorque.com.