284
COMpact 5000/R - Firmware V6.6A - Installation, Operation and Configuration V05 03/2016
Voice Mail and Fax Boxes
Fax Box
Switching the Reject Anonymous Fax Calls Function On/Off
2. In the list field at the top, select the fax box in question according to the name or
number.
3. Click
New
.
4. In the
From
...
Until
entry fields under
User
select the required user(s) you want to
assign to the fax box.
5. Click
Save
.
6. Select or clear the check boxes in the line of the corresponding users under
Admin-
istrate settings
. As a result, the authorisations will be expanded or restricted.
• Properties
of the box not controlled via a profile (except
Users/authorisations
and under
Box settings
the
Maximum recording capacity
and
Fax ID
).
Switching the Reject Anonymous Fax Calls Function On/Off
If the Reject anonymous fax calls function is enabled, incoming anonymous faxes (without
transferred number) will not be accepted.
Proceed as follows:
•
Separately for fax boxes
•
Separately for configurations
•
Using the configuration manager
Note:
As described in the following, the setting is also possible via profiles (
...
> Profiles > Configuration > Configure > ...
). If the check box
Profile-
controlled settings
has been selected, the property set in the right-hand
column will apply. For assignment of the profile, see chapter Settings >
Profiles.
Requirements:
•
Voice mail/fax function (optional, see chapter Important Information > Product Details >
Basic Assembly and Extensions)
• Readiness
enabled
1. Open the page
Devices > Voice mail/fax boxes > Properties > Call acceptance
.
