202
COMpact 5000/R - Firmware V6.6A - Installation, Operation and Configuration V05 03/2016
Address Books and Lists
LDAP Server
Information about Transfer
Information about Transfer
For the transfer of contact data from the LDAP server of the PBX to the IP end device you have
to enter the following values into the end device.
For the transfer of all selected contact groups (e. g. in the factory settings).
•
User name
cn=auerswaldschandelah,dc=auerswald
•
BaseDN
dc=auerswald
•
Password
auerswaldsecret
For the transfer of single contact groups (e. g. for contact group
DECT1
):
•
User name
cn=DECT1,dc=auerswald
•
BaseDN
ou=DECT1,dc=auerswald
•
Password is configurable
For the transfer of contacts of a single subscriber (e. g. for the internal number
31
):
•
User name
telephoneNumber=31,dc=auerswald
•
BaseDN
telephoneNumber=31,dc=auerswald
•
In this case the password is the user password of the subscriber.
Note:
You must enter the complete character string.
Ensure you type the capital and lower-case letters correctly, and do not type
any blank spaces before or after the
,
and
=
characters.
In order to avoid input errors, on page
User data > Address books >
Settings
, in the lines below the entry and list fields you can mark and copy
the user name and BaseDN.
In the configuration manager of the IP DECT server COMfortel WS-400 IP or
COMfortel WS-650 IP you have to enter the user name and the BaseDN on
page
Administration > Phonebook
in the following fields: the user name
(e. g.
cn=auerswaldschandelah,dc=auerswald
) in the
Bind user
entry
field and the BaseDN (e. g.
dc=auerswald
) in the
Base
entry field.
