Auerswald COMfortel M-720 Скачать руководство пользователя страница 53

Страница: 53 / 61

COMfortel M-720 - Advanced Information - V01 08/2021

Appendix

Attaching the belt clip

The handset has notches on each side for attaching the belt

clip.

•

Attaching the belt clip: Press the belt clip onto the

back of the handset so that the tabs on the belt clip click

into place in the notches.

•

Removing the belt clip: Press the centre of the belt

clip firmly with your right thumb. Push the nail of

your left thumb up between the clip and the casing.

Slide the clip upwards to remove.

Connecting the headset

Connect the headset with 3.5 mm jack to the left side of the
handset

Connecting the USB data cable

For data exchange between the handset and PC:

Connect the USB data cable with micro-USB plug into the
USB socket at the bottom of the handset

Contact with liquid

If the device comes into contact with liquid:

1 Disconnect the power supply.
2 Remove the batteries and leave the battery compartment open.

3 Allow the liquid to drain from the device.
4 Pat all parts dry.
5 Place the device in a dry, warm place

for at least 72 hours

(

not

in a microwave, oven etc.)

with the battery compartment open and the keypad facing down (if applicable).

6 Do not switch on the device again until it is completely dry.

Connect headset via Bluetooth ( p. 45)

Setting the headset volume: p. 47

Connect the handset

directly

to the PC,

not

via a

USB hub.

Содержание COMfortel M-720





























































Результаты поиска

Содержание COMfortel M-720

Отзывы:

Похожие инструкции для COMfortel M-720

Бренды по названию

Популярные бренды

Auerswald COMfortel M-720, Расширенная информация

Результаты поиска

Содержание COMfortel M-720

Отзывы:

Похожие инструкции для COMfortel M-720

Бренды по названию

Популярные бренды