Commissioning
COMfortel M-210/310 - Instructions V02 08/2017
37
This section describes how to commission the telephone. You
can use the telephone to make calls once the commissioning pro-
cess is complete.
Removing the Battery Security Strips
(only COMfortel M-210)
1.
Press the battery cover and slide it downwards.
2.
Remove the battery cover.
3.
Remove the battery and then peel off the green battery secu-
rity strips on the underside of the battery.
Inserting the Battery
(only COMfortel M-210)
Warning:
Improper or incorrect use of the batteries may
result in fire, explosions, or the release of caustic chemi-
cals which may cause serious damage to the device or
pose a risk to people.
씮
Only use the batteries shipped with the device or recharge-
able batteries of the same type recommended by the manu-
facturer.
1.
Press the battery cover and slide it downwards.
2.
Remove the battery cover.
3.
Insert the battery in the battery compartment with its label fa-
cing upwards. Insert the battery so that its contacts touch the
Commissioning