Auerswald COMfortel 600, Руководство по настройке и эксплуатации, Страница: 70 / 84

Operation and Configuration
70
COMfortel 600 - Setup and Operation V01 06/2014
1.
Press the microphone key.
MUTE is shown on the display.
The person on the other end of the line can no longer hear you.
2.
Press the microphone key.
The person on the other end of the line can hear you again.
Switching between Receiver and Hands-free Operation
If you would like to include other people present in the room in your telephone
conversation, you can switch from receiver to hands-free operation.
1.
Press the loudspeaker key.
2.
Hang up the receiver.
The telephone is now in hands-free operation.
3.
Pick up the receiver.
The telephone is now in receiver operation again.
Note: To switch between receiver operation and loudspeaker operation,
press the loudspeaker key during the telephone call.
Headset Operation
If you have a headset connected to your telephone, use the hook key to start
or end a telephone call.
Note: To switch between headset operation and hands-free operation,
press the loudspeaker key during the telephone call.
PBX Functions (Flash Key, R Key)
Once you have connected your telephone to an Auerswald PBX, you can use
the functions on the PBX such as query calling, call forwarding, etc. as
described in the PBX user manual. For this, you need the query key (flash key,
R key).
Note: The flash time on the telephone must coincide with the flash time on
the PBX.