325
COMfortel 1400 IP/2600 IP/3600 IP - Firmware V2.6 - Operation/Configuration - V05 09/2016
Functions
Speed Dialling
Assignment Overview
Speed dialling keys assigned to internal subscriber and group numbers
allow the user to view the LEDs and gain an overview of which subscribers
and groups are active or busy.
Pick-Up and Call Pick-Up
Speed dialling keys defined with internal subscriber and group phone
numbers enable the pick-up function for these subscribers and groups. If the
LED next to the key is blinking red because the saved phone number is
being called, you can take the call on your telephone by pressing the speed
dialling key and then confirming.
If a subscriber allows call take-over (for example, on an answering
machine), you can still take the call on your telephone in the same manner
even after it has already been accepted.
Display of the Registration Status
If the registration status display is enabled, the individual registration status
of the subscribers is shown by the LEDs of the speed dialling keys assigned
to internal VoIP subscribers. If a particular VoIP subscriber is not registered
at the PBX, their LED will blink yellow.
How to switch the registration status on or off is describe in the chapter
Settings > Display > Settings Configuration Manager Display.