277
COMfortel 1400 IP/2600 IP/3600 IP - Firmware V2.6 - Operation/Configuration - V05 09/2016
Functions
Relays (System Telephone)
Function Key for Switching Relays
Press the key to switch the configured relay on or off or to toggle.
In addition, when functions are defined on the first key level, the status of
the relay is indicated by the corresponding LED.
Requirements for using the function:
•
Telephone is system telephone on the PBX
• Switching of relay
permission granted in the PBX
Proceed as follows by assigning the function key:
•
Using the Configuration Manager by selecting
Relay
•
Using the telephone by selecting
Relay
Notes:
For further information about the general procedures when assigning
function keys, see
Additional settings for this function key are described in the following.
Operation
decide each time a key is pressed
Account
Select the system telephony account
LED signalling on the key:
green
The relay configured on the key is enabled.
off
The relay configured on the key is disabled.