Auerswald COMfortel 1200, Руководство по установке

Страница: 43 / 68

Preparation
COMfortel 1200/1400 - Firmware V1.8 - COMfortel Set V3.10.0 - Setup V02 05/2015
43
Further Steps
– In order to use the headset for calls, enable the headset operation at the
end of commissioning (in
functions > headset ).
Important Information on the Location of the Telephone
Requirements
– Existing connections in the immediate vicinity of where the telephone is
placed:

ISDN socket outlet connected to the PBX
Note: The telephone can be operated not only on an internal S
0
port but
also on a U
P0
port on the PBX. Only one telephone per U
P0
port can be con-
nected. Also see the instructions of the PBX.
Warning: Liquid entering the casing can cause life-threatening electric
shocks and damage or destroy the telephone.

Only operate the telephone in closed, dry rooms.
 Only clean the casing of the device with a slightly moist cloth or an anti-
static cloth.
Caution: Mechanical stress and electro-magnetic fields can result in dam-
age to or destruction of the device or impairment of its functions.
 Avoid mechanical loads (e.g. vibrations).
 Avoid the proximity of devices which radiate electro-magnetic fields (for
example, radio sets, professional radio equipment, amateur radio
equipment, mobile phones, DECT systems, WLAN routers, etc.).
 Do not expose the device to direct sunlight.
 Protect the device from dirt, excessive dust, condensation, caustic
liquids, and steam.

Note the values for ambient temperature and humidity given in the tech-
nical data.
Assembling the Telephone
•
Place the telephone on a clean, flat surface.
Caution: Some paints or plastics used on furniture may react chemically
with the plastic feet on the device and cause them to soften. Plastic chem-