Auerswald COMfortel 1100 Скачать руководство пользователя страница 92 | Manualshive

Страница: 92 / 273

Auerswald COMfortel 1100 Скачать руководство пользователя страница 92

92

COMfortel 1100 - Firmware Version 4.4 - COMfortel Set V2.7 - Version of the Manual 04 11/10

Telephone Book and Telephone Number Lists
Caller List
Configuring Calls to be Recorded for Caller List

Configuring Calls to be Recorded for Caller List

If you would like to prevent too many entries from being entered in the caller list, you can
configure the list in relation to the calls to be recorded. The following calls can be selected:

• External calls without telephone numbers

• External calls with telephone numbers

• Internal calls

• Alarm calls

• Door terminal calls

• Calls accepted by another subscriber

• Other calls

The configuration can be made as follows:

• Via COMfortel Set

Configuring Calls to be Recorded for Caller List via COMfortel Set

Requirements:
– An open configuration and the required PIN, if necessary

1.

Open the page Settings/functions > Lists.

2.

Under Caller list, select or clear the check box for the types of call listed on the tab.

Further steps:
– Save your configuration before closing.

The call type in question is entered on the caller list.

The call type in question is not entered on the caller list.

«
...
90
91
92
93
94
...
»

Содержание COMfortel 1100


















































































































































































































































































Отзывы:

Нет отзывов