Auerswald COMfortel 1100, Инструкции по эксплуатации и настройке, Страница: 32 / 273

32
COMfortel 1100 - Firmware Version 4.4 - COMfortel Set V2.7 - Version of the Manual 04 11/10
Using the Configuration Software COMfortel Set
Configuration Software COMfortel Set
Creating a New Configuration
Or, proceed as described in the following.
1. Open the menu File > Open.
2. Click File.
A dialogue for selecting the file with the configuration data opens.
3. Switch to the directory where the file is located and select the file.
4. Click Open (this text is dependent on the operating system used).
Creating a New Configuration
If you would like, for example, to create a configuration for a telephone before the required
connection to the PBX or to the PC has been established, you can open an empty configuration
as described in the following.
1. Open the menu File > New.
2. Select the type of telephone COMfortel 1100 in the upper list field.
3. Select the type of PBX on which you would like to operate the telephone.
4. Click OK.
Saving Configuration
The configuration can be saved on the telephone or as a file on the PC.
Saving Configuration on Telephone
Requirements:
– An existing PC connection configured correctly in COMfortel Set to a PC interface on the
PBX or another connected system telephone
– MSN configured for the system telephone
– An open configuration and the required PIN, if necessary