manualshive.com logo in svg

Auerswald COMfortel 1100, Инструкции по эксплуатации и настройке, Страница: 30 / 273

Поделиться
Скачать
Auerswald COMfortel 1100 Скачать руководство пользователя страница 30

30

COMfortel 1100 - Firmware Version 4.4 - COMfortel Set V2.7 - Version of the Manual 04 11/10

Using the Configuration Software COMfortel Set
Configuration Software COMfortel Set
Configuring V.24 options

3.

In the IP address entry field, enter the IP address of the PBX. The following entries 
are possible:

4.

in the IP port (default: 7002) entry field, enter the configuration port for system 
telephones on the PBX. The following entries are possible:

5.

Click OK.

Configuring V.24 options

If there are transmission problems with the V.24 connection, the transmission rate can be 
restricted to 9600 Baud. This increases transmission reliability and improves the quality of the 
connection, for example, on long lines or in a disrupted environment.

1.

Open the menu Options > V.24 options....

2.

Select one of the following options:

3.

Click OK.

IP address with areas from 0 to 255 (example: 192.168.0.240)

1 to 65535

Safe transmission: Limits the transmission rate to 9600 Baud.

Fast transmission: Allows the maximum possible transmission rate.

Содержание COMfortel 1100


















































































































































































































































































Отзывы:

Нет отзывов