manualshive.com logo in svg

Auerswald COMfortel 1100, Инструкции по эксплуатации и настройке, Страница: 259 / 273

Поделиться
Скачать
Auerswald COMfortel 1100 Скачать руководство пользователя страница 259

COMfortel 1100 - Firmware Version 4.4 - COMfortel Set V2.7 - Version of the Manual 04 11/10

259

Glossary
Terminology and Functions
P

P

Permanent Configuration

For situations where your settings are supposed to apply even after configuration switchovers, 
you can use the so-called permanent configuration. If permanent configuration is enabled, the 
configuration-dependent settings will be overridden by the permanent configuration settings.

Permanent configuration is available for the following settings:

• Call forwarding for external number

Phone Lock

The phone lock can be used to block the telephone from unauthorised use. Even after enabling 
the phone lock, it is possible to receive incoming calls and to make emergency calls (manual 
dialling of emergency numbers entered in the PBX only).

Pickup

Using Pickup, you can take a call on your own phone that was originally sent to another internal 
telephone.

If the call has already been taken, the call can be taken using same procedure if the call take-
over has been allowed by the subscriber being called. This function is useful, for example, in 
the case of answering machines.

PIN

A PIN (Personal Identification Number) is a multi-digit secret code that has to be entered to get 
access to services or authorisations.

Power Save Mode

In power save mode, the LEDs are inactive (exception: the message LED blinks for missed 
calls).

Содержание COMfortel 1100


















































































































































































































































































Отзывы:

Нет отзывов