Auerswald COMfortel 1100 Скачать руководство пользователя страница 184

Страница: 184 / 273

184

COMfortel 1100 - Firmware Version 4.4 - COMfortel Set V2.7 - Version of the Manual 04 11/10

Configuring and Operating Functions
Phone Lock
Configuring and Operating Function Key for Phone Lock

Configuring and Operating Function Key for Phone Lock

Press the key on the telephone in the idle state to enable the phone lock.

Press the key again and then enter the user PIN, admin PIN or subadmin PIN to disable the
phone lock again.

In addition, when functions are defined on the first key level, the status of the function is
indicated by the corresponding LED.

The configuration can be carried out as follows:

• Via COMfortel Set

Configuring Function Key for Phone Lock via COMfortel Set

Requirements:
– An open configuration and the required PIN, if necessary

Open the page Function keys > Assign function keys.

Click one of the following tabs:

Right-click the function key you want to assign.

A function selection dialogue opens.

Select the Phone lock function.

The current settings for defining the key are displayed.

In the Key name entry field, enter a name for the key. The following entries are
possible:

LED signalling next to the key:

Red

The phone lock is enabled.

Off

The phone lock is disabled.

Level 1: Keys are defined on the first key level.

Level 2: Keys are defined on the second key level.

Up to 16 digits

Digits and characters

Содержание COMfortel 1100


















































































































































































































































































Результаты поиска

Содержание COMfortel 1100

Отзывы:

Auerswald COMfortel 1100, Инструкции по эксплуатации и настройке, Страница: 184 / 273

Результаты поиска

Содержание COMfortel 1100

Отзывы: