Auerswald COMfortel 1100 Скачать руководство пользователя страница 102

Страница: 102 / 273

102

COMfortel 1100 - Firmware Version 4.4 - COMfortel Set V2.7 - Version of the Manual 04 11/10

Configuring and Managing the Telephone
Display
Configuring Date Format

Configuring Date Format

The date format selected here is displayed in the idle state as well as in the caller and calls lists.

The configuration can be made as follows:

• Via COMfortel Set

Configuring Date Format via COMfortel Set

Requirements:
– An open configuration and the required PIN, if necessary

Open the page Settings/functions > Display.

In the Date format list field, select one of the following options:

Further steps:
– Save your configuration before closing.

DD.MM.YY: Selects the date format in the order of day, month, year separated
by points.

DD/MM/YY: Selects the date format in the order of day, month, year separated
by slashes.

DD-MM-YY: Selects the date format in the order of day, month, year separated
by hyphens.

YY-MM-DD: Selects the date format in the order of year, month, day separated
by hyphens.

Содержание COMfortel 1100


















































































































































































































































































Результаты поиска

Содержание COMfortel 1100

Отзывы:

Auerswald COMfortel 1100, Инструкции по эксплуатации и настройке, Страница: 102 / 273

Результаты поиска

Содержание COMfortel 1100

Отзывы: