Auerswald a/b-Audiobox, Руководство по эксплуатации, Страница: 29 / 40

Settings
a/b-Audiobox - Operation Guide - V03 10/2020
29
316
: Assigns a/b switching modules with switching frequency 6 to the key.
You will hear the confirmation tone (five sequential tones).
The a/b-Audiobox continues to be in programming mode. For ad
-
ditional programming actions, begin with the 3rd step.
Setting the Switching Time of the a/b Switching Modules
The switching time of the a/b switching modules specifies how long the a/b
switching modules are addressed for.
Requirements:
– Connection has been made to the internal a/b port on a PBX
– An internal telephone number has been set up for the a/b-Audiobox on the
PBX
– Knowledge of the PIN (0000 in the factory settings)
– DTMF-enabled internal telephone or DTMF tone generator
– Programming mode has been initiated (by pressing and holding the pro
-
gramming key for five seconds)
1. Pick up the receiver of an internal telephone.
2. Dial the internal telephone number of the a/b-Audiobox.
This establishes the connection.
3.
Dial
*
.
You will hear the confirmation tone (five sequential tones).
Note: If you only hear a short sound instead of the confirmation tone (after
restarting programming mode), enter the PIN and then dial
*
again.
4.
After the confirmation tone ends, dial one of the following character strings.
551
: The a/b switching modules remain switched on for 0.5 seconds (fac -
tory settings).
552
: The a/b switching modules remain switched on for 1 second.
553
: The a/b switching modules remain switched on for 1.5 seconds.
554
: The a/b switching modules remain switched on for 2 seconds.
555
: The a/b switching modules remain switched on for 2.5 seconds.