12 / 16
*5100* pstn_prefix*
Program memory M100 PSTN_PREFIX
Factory setting:
empty
The deletion of M100 is done by *5100**
*9900*
Disconnect
*9901*
Reactivate loudspeaker
Defining Call Procedures
Determine the call chosen from the storage places.
Determine the call chosen from the storage places.
You determine this setting by programming at least one of the three direct dialing
storage places M1-M3.
After touching the switch on button and the direct dialing button the communication
terminal immediately tries to build-up a connection to the partner. The action is
terminated by the successful realization of the connection or the deactivation of the
communication terminal, if the programmed time limit *20xx* (15 s) runs out.
Example:
#1234#
Getting the permission to program
*5001*
101
*
Direct dialing button 1 programm the linked storage button and
determine the partner number e.g. 101.
*5002*
102
*
Direct dialing button 2 programm the linked storage button and
determine the partner number e.g. 102.
*5003*
103
*
Direct dialing button 3 programm the linked storage button and
determine the partner number e.g. 103.
*20
15
*
set time limit e.g. 15 s, to determine, how long IC3P / IC3S shall
wait, if the user touches a direct dialing button and that the called
partner accepts the call.
If the no direct dialing or call acceptance is realised, the IC3P / IC3S
deactivates itself after the expiry of the chosen time limit.
Defining Call Acceptance Procedures
To Define Automatic, Mute Call Acceptance with the First Ring/Signal
You can define this call acceptance scenario by setting the programmed ring/signal
counter *11xx* (3) at the value “00”. Incoming calls to the station will then be signaled
optically and accepted automatically with the first signal. In contrast to the other call
acceptance scenarios, the speaker and the microphone are muted.
