-
installer
HRC
70
35kW HIGH TEMPERATURE HEAT PUMP
manual
-
-
installer
HRC
70
35kW HIGH TEMPERATURE HEAT PUMP
manual
-
14
15
5.2 - Electrical boxes
6 - WARRANTY
The warranty covers the
HRC
70
Heat Pump
and the
HRC
70
Pilot
components for a period of two (2) years, starting from
the date the appliance was activated, if the warranty form
was sent back to the manufacturer. In the absence of this
document, the date of manufacture will be used to determine
the start date of the warranty.
If the appliance was installed by an AUER-approved
technical center, you will be entitled to an additional
year on your warranty. A comprehensive warranty will
apply for the first year (parts, labour and on-site support)
followed by two more years of coverage for parts only.
The appliance is guaranteed against all manufacturing
defects, provided that it was installed according to the
instructions provided in this manual and in compliance with
all current rules and regulations in the country of installation.
All electrical connections should comply with the C15-100
standard.
Under no circumstances does a defective part warrant the
replacement of the whole appliance.
The warranty only applies to parts which we (AUER) identify as
having been defective at manufacture. If necessary, the part
or product should be returned to the manufacturer, but only
with prior agreement from our technical department. Labour,
transport, and packaging costs are the responsibility of the
user. Repairs on a device will not result in compensation.
The warranty on replacement parts ends at the same time as
the warranty of the appliance.
The warranty only applies to the appliance and its
components and excludes any part or installation external to
the appliance: electrical parts, hydraulic components, etc...
The warranty will not apply in the absence of, insufficient, or
improper, maintenance of the appliance.
It is essential to carry out regular annual maintenance on the
appliances and on the installation to ensure sustained use
and durability. This maintenance should be carried out by
your installer, or by an AUER-approved technical center. In the
absence of regular maintenance the warranty is rendered null
and void.
Any work on the refrigerant circuit must be undertaken by a
qualified professional with a category 1 certificate of aptitude.
It is forbidden to release gas from the refrigerant circuit into
the atmosphere, and it is obligatory to recover the refrigerant
before undertaking any work on the circuit.
The HRC
70
Heat Pump
uses R290 refrigerant fluid. Given
the flammable nature of the fluid, any work on the refrigerant
circuit must be done with appropriate materials and
conforming to all regulations in effect.
If an appliance is presumed to be the cause of any damage,
it must not be moved or tampered with before an expert
assessment has been carried out.
6.1 - Limitations of warranty
The warranty does not apply to defects or damage caused by
situations or events such as:
- Misuse, abuse, negligence, improper transport or handling.
- Incorrect installation, or installation which has been carried
out without following the instructions in the manual and
user guide.
- Insufficient maintenance.
- Modifications or changes carried out on the appliance.
- Impacts from foreign objects, fire, earthquakes, floods,
lightning, ice, hailstones, hurricanes or any other natural
disaster.
- Movement, imbalance, collapse or settling of the ground or
the structure where the appliance is installed.
- Any other damage which is not due to defects in the product.
We do not guarantee against variations in the colour of the
appliance or damage caused by air pollution, exposure to
chemical elements, or changes brought about by adverse
weather conditions.
The products are not guaranteed against dirt, rust, grease or
stains which occur on the surface of the appliance. We are not
responsible for any variations in colour.
6.1.1 - General information
Rep
Reference
Description
1
1244503
Circuit board C4 - Supply - EC
9
1244037
Three-phase starter
11
1243147
4A Fuse 5x20
13
1943123
Three-phase starter controller
Reference on electrical wiring diagram
Scr
ew
-in elec
tric
al c
onnec
tions
RCP
Phase relay controller
KMC1
Compressor 1 contactor
KMC2
Compressor 2 contactor
BUS
2-core sheathed cable
Elec
tric
al
connec
tions
using F
ast
on
terminals
K1
Compressor 1
K2
Compressor 2
