-
manual
HRC
70
PILOT -PREMIUM-
/2
-
24
Enter
Turn
Turn
Turn
Turn
Enter
Enter
Enter
Enter
Enter
s e t t i n g s
A M B I e N C E
E C O
h o t w a t e r
P o o l
f r o s t p t
b o o s t
s u m m / w i n t
l a n g u a g e
B e e p
m e n u i n s t .
Set in Boost mode
Set in Summer/Winter mode
Change the language
Choice of activation/
deactivation of a beeping
sound with each press of the
dial.
Access to the installer menu.
Note :
When the circuits are controlled by a
thermostat (or aquastat for domestic hot water), the
settings
sub-menu does not appear.
Note :
If both circuits are heating circuits, and each
one has an ambient temperature sensor, the
settings
sub-menu
gives the following settings :
ambience 1 ambience 2
eco 1
eco 2
frost pt 1
frost pt 2
Note :
The ambient temperature sensor must be set-up and activated.
5.3.1 - Setting the target temperatures
a m b i e n c e
2 0 . 0
°
C
by default
E C O
1 7 . 0
°
C
by default
f r o s t p t
7 . 0
°
C
by default
a m b i e n c e
2 2 . 0
°
C
example
E C O
1 6 . 0
°
C
example
f r o s t p t
8 . 0
°
C
example
Enter
Enter
Enter
Enter
Enter
Enter
A M B I e N C E
E C O
f r o s t p t
5.3.1.1 - Setting the
AMBIeNCE
temperature
5.3.1.2 -Setting the
ECO
temperature
5.3.1.3 - Setting the target ambient
temperature
Frost protection
Note :
Exclusively for an ambient temperature sensor with
display on circuit 1.
Note :
Exclusively for ambient temperature sensor with display.
Note :
Exclusively for ambient temperature sensor with display.
turn to
modify
the set
temperature
turn to
modify
the set
temperature
turn to
modify
the set
temperature
turn to
see the
following
setting
-
ECO
turn to
see the
following
setting
-
frost pt
turn to
see the
following
setting
hot
water
a m b i e n c e
E C O
f r o s t p t
