8
REMOTE CONTROL
: Press to toggle between Standby and Operation (applicable only when Standby is
enabled with power connected to the radio)
: Mute
0-9:
Input index number on the list / input characters for WiFi password
: Preset the current playing station to Favorite
▲
: Cursor up
◄
: Cursor left / back to previous menu
: Alarm button
: Sleep Timer
Mode:
Switch between Internet radio /BT / Media Centre
: Main Menu
: Previous station on the list/previous track on BT/Media Centre
Local:
Access the local station list (Local area set up in Configuration)
: Recall the favorite list
OK:
Confirm button
►
: Cursor right
▼
: Cursor down
Vol+:
Volume up
Vol-:
Volume down
EQ:
Equalizer
: Next station on the list/next track on BT / Media Centre
: Play/pause for BT / Media Centre Play / stop for Internet radio
Dimmer:
Access the Dimmer menu to adjust the brightness of the display
Info:
Quick access to Network and System information
USING REMOTE CONTROL
On the alpha-numeric keypad, press the button repeatedly to cycle through the characters assigned to each button. Refer to
the following list. To input a character, highlight it and press the
►
button to confirm and input the next character. When it
comes to the last character of the password, press
[OK]
to complete the entry.
Button 1:
1 and different kind of symbols !@#$%^&*()_+[]{};:'”
\|,./<>?
Button 2:
2ABCabc
Button 3:
3DEFdef
Button 4:
4GHIghi
Button 5:
5JKLjkl
Button 6:
6MNOmno
Button 7:
7PQRSpqrs
Button 8:
8TUVtuv
Button 9:
9WXYZwxyz
Button 0:
0
USING CONTROL BUTTON ON THE RADIO UNIT
Use the
[Dial/Select]
knob to scroll through the characters, highlight it and press
[
►
]
button to confirm and input the next
character. When it comes to the last character of the password , press
[Dial/Select]
to confirm and complete the entry.
Note:
The password is case sensitive.
BEFORE YOU START
Please ensure the following is ready:
You have a broadband internet connection. A wireless broadband router is connected to the internet successfully. The radio
supports Wireless B, G and N connection (Wireless N router can also be used with the setting on B or G). You know the Wired
Equivalent Privacy (WEP) or Wi-Fi Protected Access (WPA) data encryption code/password. You need to key in the correct
code when the radio is connected to the wireless router for network connection. If you do not know the code/password, please
contact the person/technician who set up the router/network for you. The radio can work via Wireless network connection (Wi-Fi
connection) and Wired connection (Ethernet RJ45).
GETTING STARTED
• Remove internet radio from the package box.
• Plug in the power adapter and switch the Power on/off
switch (on the rear cabinet) to ON. Press
[ ]
button on the front.
Caution:
Use only the adaptor supplied with the radio. Connecting a power supply with a different rating will cause
permanent damage to the radio and may be hazardous.
