INSTALLATION &
OPERATING GUIDE
DANTE®–AES67
MICROPHONE INTERFACE
M55WD
Страница 1: ...INSTALLATION OPERATING GUIDE DANTE AES67 MICROPHONE INTERFACE M55WD M55WD ...
Страница 2: ...tional wiring and installation time by 90 and eliminates wiring errors Once the connection is made to the network via the Audix DN4 interface the Audix microphone s will be automatically recognized and populated by model number in the Audix DSP plugin IN THE BOX M55D microphone Knurled fastener Seismic restraint cable Spec sheet Installation guide THE AUDIX INTEGRATED MICROPHONE SYSTEM DANTE AES67...
Страница 3: ... mic input Use Audix Cat7 or shielded category cable FIGURE 2 Plug in 7 pin microphone connector into mating receptacle as shown above Refasten lid FIGURE 4 Seismic cable installation Insert cable through the top of cable stay barrel pulling excess cable until taut Place cable eyelet under brass screw and fasten FIGURE 5 Connect up to four microphones to the Audix DN4 or one M3 and one single chan...
Страница 4: ...udix help file for detailed instructions FIGURE 9 1 Open Dante controller to confirm discovery on your network 2 If using Q SYS DSP open Designer Asset Manager and Dowload Audix Plugin 3 Open Audix Plugin 4 See Figure 10 for Q SYS control and LED functions 5 For DSP s currently without Audix plugin audio channels can be routed through the Dante controller 6 See tech support at audixusa com for upd...
