Audison bit Tune, Руководство пользователя

Страница: 49 / 100

USER’S MANUAL / bit Tune /
49
7. USING BIT TUNE WITH THE HELP OF A PC
Analyzes, through electrical measurements, the characteristics of an audio source connected to the bit Tune. It is
possible to measure the maximum output voltage, the maximum undistorted level (value required for connecting to
a processor), the distortion, or to check for any malfunctions.
It is also possible to display the presence of equalization on the output signal of the source, and determine the need
to perform the de-equalization process in the processor.
It is necessary to perform this analysis when connecting a processor to a source in order to ensure the highest level
of undistorted signal. This allows to avoid any background noise at the output of the processor, and in general, to
ensure the highest undistorted level at the input of any audio device, and obtain the best acoustic response.
Connection diagram:
LEFT
CHANNEL
RIGHT
CHANNEL
LEFT CHANNEL
RIGHT CHANNEL
SEGNAL INPUT
SELECT
PRE IN BNC SPK IN
WHEN USE SPK IN INPUT DON’T USE PRE IN INPUT
SEGNAL INPUT
SELECT
PRE IN BNC SPK IN
WHEN USE PRE IN INPUT DON’T CONNECT SPK IN
EMS PC ANALYZER
LINE NOISE
POWER
SEGNAL INPUT
SELECT
RIGHT
VOLUME
MONITOR
47 OHM
SPK SYM
NO LOAD
LEFT
PRE IN BNC SPK IN PROBE
MIN • • MAX
LOAD SIMULATOR
SPEAKER IN
TRACK 1 TRACK 1 TRACK 1
SEGNAL INPUT
SELECT
PRE IN BNC SPK IN
PRE-OUT
SPEAKERS OUT
*
Disconnect the speaker
Fig. 1A Fig. 1B Fig. 1C
* *
7.1 SOURCE CHECK
7