USER’S MANUAL / bit Tune /
47
4. COMPANY INFO
Customizes the bit Tune through the user’s personal
data. This information will be printed on the header of
the final report
5. LANGUAGE
Allows you to display context messages in the selected
language (Italian or English).
By default, the PC software is automatically set to the
English language. To change the language, select
language from the menu and restart the PC software.
Note:
Additional languages may be available in the future.
Please check through “Check for Updates”
Using the
“Processor Auto Setup”
function you can
automatically set time delays, equalization curve and
output levels of an Audison bit connected to the bit Tune,
setting the processor memories according to your needs.
For best acoustic results, the placement of the speakers
and their orientation is very important. In fact, no equalizer
can improve “fuzzy” sounds or rich in unwanted harmonics,
resulting from internal reflections in the vehicle. Before the
Processor auto Setup
, make sure that the audio system
is characterized in the most appropriate manner possible.
MENU description
1. CHANNEL MAP:
This window is active, and corresponds to the CHANNEL MAP of the processor connected
and previously configured. The window contains the listening position indicator (selected in green). The diagram
shows four positions: driver (Front Left), passenger (Front Right), center front (Front) and rear passengers (Rear).
The indication is acting solely as a reference, allowing you to view the listening point on which the calculation of
time delays and equalization has been optimized.
The HSM microphone will be positioned on the chosen listening point.
2. Auto EQ + Auto Time Alignment:
This function starts the wizard for the complete automatic setting of the
Audison bit processors for the equalization, the time delays and the amplifiers sensitivity check
1
4
9
3
5
6
7
8
2
10
11
6.2.6
PROCESSOR AUTO SETUP
6
Содержание bit Tune
Страница 1: ...USER S MANUAL rev 2 2 audison com ...
