128-6517
1 of 16
Model APS-875a
Owner’s Manual
IMPORTANT ! In order to provide you with the highest level of security to your
vehicle, this system is equipped with selectable manual override circuitry. It is
possible that you will need to override you security system if the transmitter
becomes lost, or inoperative due to battery failure. Reading the sections on
"Manually Overriding Your System" is necessary to fully understand the procedure
required to enable your vehicle in such situations. In addition, the chart on the last
page of this manual has a section for the particular features and options installed in
your vehicle as well as the override method selected. Although the default mode is
"Valet Switch" operation, the system can be configured for "Custom Code"
operation for enhanced security. Confirm the override mode selected on the last
page of this manual, and familiarize yourself with the section on it's operation.
FEATURES :
w
2 Four Button S.A.W. Code Hopping Transmitters
w
Six Channel Code Learning Programmable Receiver
w
External Superheterodyne Receiver Antenna
w
Single Or Two User Programmable W/Separate Control Outputs
w
Single Button Lock/Unlock or Separate Button Lock/Unlock or Both
w
Remote Keyless Entry With Optional Access Guard (must have power door
locks)
w
Selectable Manual Override Mode
w
New Enhanced Panic Feature (Any button other than unlock stops siren, no
change to the units state)
w
Smart Disarm (If triggered, elect to shut off siren, or disarm entire unit )
w
Selectable Automatic Timed Start Mode
w
Adjustable Shock Sensor Via The Transmitter (Pre-Detect Off, Pre & Full Detect
Off, City Mode)
w
Safe Start Output Controlled From Channel 3 (Option Channel 3 For Trunk, Or
For R/S)
w
Remote Panic In All Modes (Press & Hold Lock /Unlock Button For 3 Seconds
To Engage)
w
Improved Custom Code Override, User Selectable and Programmable
w
Protected Push Button Valet/Override Switch
4 Button Remote Start Security System With
Plug-In Shock Sensor & Starter Disable
