RISK OF ELECTRIC SHOCK
DO NOT OPEN
WARNING
WARNING: TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO
NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE.
The lightning flash
and arrowhead within
the triangle is a
warning sign alerting
you of "dangerous
voltage" inside the
product.
CLASS 1 LASER PRODUCT
CLASS 1
LASER
PRODUCT
CAUTION
INVISIBLE LASER RADIATION
WHEN OPEN AND INTERLOCKS
DEFEATED.
AVOID EXPOSURE TO BEAM.
This product contains a low power laser device.
The exclamation point
within the triangle is a
warning sign alerting
you of important
i n s t r u c t i o n s
accompanying the
product.
WARNING: TO REDUCE THE RISK
OF ELECTRIC SHOCK, DO NOT
REMOVE COVER (OR BACK) NO
USER-SERVICEABLE PARTS
INSIDE. REFER SERVICING TO
QUALIFIED SERVICE
PERSONNEL.
MICRO CD SYSTEM
OPERATING INSTRUCTIONS
811-630391-090 Printed in China
SPECIFICATIONS
GENERAL
Power consumption:
16 W
Power source:
AC 120V ~ 60Hz
Specifications subject to change without notice.
TROUBLE SHOOTING GUIDE
ITEMS TO CHECK
• Make sure AC power plug is secure in the
outlet, and outlet has power.
• Make sure FUNCTION switch is set to CD.
• Make sure disc label is facing up.
• Make sure disc is clean.
• Pause mode is activated.
• Disc may be damaged or dirty; check disc.
• Make sure the unit is on a secure spot.
Vibration or jarring can cause the disc to
skip.
• Make sure FM antenna wire is unwind.
• Electrical interference in your home can
cause poor reception. Move the unit away
from sources of interference (especially
those with motors and transformers).
• Reposition or turn the unit for better
reception.
• Tape heads are dirty; clean them.
• Tape is damaged. Try another tape.
• Tabs on edge of cassette may be missing
or broken. If you want to record on that
cassette cover the holes with removable
tape.
PROBLEMS
CD
System does not turn on
Disc in place but unit won't play
Disc skips
RADIO
Poor FM reception
Poor AM(MW) reception
TAPE
Distorted or noisy recording
Record button won't depress
TO STOP RECORDING
Press the
STOP/EJECT button.
TO INTERRUPT RECORDING
Press the PAUSE button.
To resume recording, press the
PAUSE button again.
TO ERASE A RECORDED TAPE
1. Set the FUNCTION switch to
TAPE/POWER OFF.
2. Insert a tape with the side you
want to erase facing you.
3. Press the RECORD button to
start erasing.
CLEANING CD
If the CD skips or will not play, the disc
may need cleaning. Before playing, wipe
the disc from the center out with a
cleaning cloth. After playing, store the
disc in its case.
MAINTENANCE
CLEANING THE UNIT
Do not use volatile chemicals on this unit. Clean by lightly wiping with a soft cloth.
IMPORTANT NOTICE:
• Should the CD door be opened before the reading of the CD is completed, a
jamming noise may occur. This can be resolved by closing the CD door and
then setting the FUNCTION switch temporarily to TAPE/POWER OFF.
• If an abnormal display indication or an operating problem occurs, disconnect
the AC power cord. Wait at least 5 seconds, then reconnect the AC power
cord.
• Before transporting the unit, take out the disc from the CD tray.
CLEANING THE TAPE HEADS
Clean the head with a cotton bud slightly
moistened with cleaning fluid or
denatured alcohol.
RECORDING
4.
Prepare the source to be recorded and play it.
Recording from a CD
Recording from the radio
5.
Press the PAUSE button.
3.
Press the
RECORD
button.
1.
Insert a cassette tape.
2.
Press the
PAUSE button.
2)75-
2)75-
PLAY
• USE ONLY NORMAL (TYPE
I
) TAPES FOR RECORDING.
(Refer to listening to the Radio)
(Refer to Compact Disc Playback)
TAPE PLAYBACK
1.
Set the
FUNCTION
switch to
TAPE/
POWER OFF.
3.
Press the
PLAY button.
TO STOP PLAYBACK
P r e s s t h e
S T O P / E J E C T
button.
TO INTERRUPT PLAYBACK
Press the PAUSE button.
To resume play, press the
PAUSE button again.
2.
Insert the cassette tape.
PLAY
TO CHECK WHAT HAS BEEN PROGRAMMED
1.
Press the PROGRAM button.
2.
Press the
PLAY/PAUSE button.
3.
Press the
SKIP + button.
OR
•
Press the PROGRAM button.
TO CLEAR THE PROGRAM
•
Set the FUNCTION switch to
T A P E / P O W E R O F F o r
TUNER
OR
•
Open the CD door (during
stop mode).
TO FAST WIND
Press the
REWIND or
F.FWD
button. Press the
STOP/EJECT
button to stop winding at the desired
position.
WHEN THE TAPE REACHES ITS
END
During fast wind or regular play, the
tape will stop automatically when its
end is reached .
REMOTE CONTROL FOR CD (OPTIONAL)
INSTALLING BATTERIES
Install two R03 (AAA or SUM-4) size batteries
into the battery compartment of the Remote
Control.
BATTERY REPLACEMENT
When batteries become weak, the operating
distance of the Remote Control is greatly reduced
and you will need to replace the batteries.
USING THE REMOTE CONTROL CORRECTLY
• Point the Remote Control at the REMOTE
SENSOR. Press the button required.
• When there is a strong ambient light source,
the performance of the infrared REMOTE
SENSOR may be degraded, causing unreliable
operation.
WARNING
• If the Remote Control is not to be used for a
long time, remove the batteries to prevent
possible damage through battery leakage.
• Do not mix different types of battery, or old
batteries with new ones.
OR
•
Press the STOP button.
