The 1
st
line
The first line is where you actually enters notes or events.
Here are the possible events:
•
a
arp note
•
<
lowest note minus 1 octave
•
1 to 8
a specific note within the chord you play (low to high)
•
>
highest note plus 1 octave
•
c
chord
The 2
nd
line
The 2nd line allows you to edit rhythm and accent. Essentially, it controls the note velocity and gate
time.
Here are the possible events:
•
x
velocity: note | gate: arp setting
•
X
velocity: full | gate: arp setting
•
_
velocity: note | gate: 100% (tie)
•
/
velocity: full | gate: 100% (tie + accent)
•
&
extends the previous step (adds 1 step to gate time)
•
o
rest – or silence if you prefer
Tip 1: if you don’t want to bother with that and only use the arp like a classic arp, set length to 1,
and 1
st
step note to to a and rhythm to x and you’re done.
Tip 2: if you set the voice mode to m2 (legato mode), a step set to _ or / will slide to the next step if
it is different from a rest and if glide is different than 0. Great for 303-ish mono sequences.
Audiothingies Micromonsta user manual
27
