Rst = on
When set to on, the phase of the LFO will be set to the phase programmed with the phase parameter
when the voice is trigged by a key.
If delay is applied, then it will reset to this phase value when the delay time has elapsed.
Rst = off
When set to off, the phase is never reset to any value, the LFOs are free-running, however the phase
parameter now controls the phase offset between the 8 voices.
Example: if the phase is set to 90°, voice 2 and voice 1 will have their phase offset by 90°. Same for
voice 3 and voice 2. Etc… So if the phase is set to 0, you now have locked free running LFOs.
Note: This phase relationship will be true unless you modulate the LFO speed in the modulation
matrix. If you applied modulation and removed it, you can resync the LFOs either by:
•
sending a MIDI start command
•
turning the phase parameter encoders
Audiothingies Micromonsta user manual
20
