saw
The classic sawtooth waveform.
Shape adds a second phase shifted sawtooth to the first one.When shape is set to 127, the oscillator
will produce a sawtooth wave with its pitch of 1 octave higher.
squ
The classic square oscillator with PW.
Shape controls the pulse width.
ss1
This oscillator produces 3 detuned saws for that Roland-ish “supers@w” sound, but without the
nasty aliasing.
Shape controls the detuning of 3 oscillators
ss2
Same as ss2, but the detuning between oscillators is unbalanced, which gives slightly different
results.
Shape controls the amount of detuning.
sws
This oscillator internally has 2 oscillators, 1 master, and 1 sawtooth slave oscillator that is hard
synced to the master.
The shape parameter controls the pitch of the slave oscillator.
sqs
Same as sws but with a square slave oscillator
rz1, rz2 and rz3
Those are phase distortion algorithms from the Casio CZ series.
They all simulate a filter sweep with the shape parameter.
Audiothingies Micromonsta user manual
11
