AUDIOPLEX TECHNOLOGY
TM
404 GWH P.O. BOX 440 MELVIN VILLAGE, N.H. 03850
1-800-257-2077 603-544-8601 FAX: 603-544-8901
www.audioplex.com
SPKCNV
SPEAKER LEVEL TO LINE LEVEL CONVERTER
SPECIFICATIONS
WARRANTY
Connectors:
Input: Spring Clips / Output: RCA jacks
Power Handling:
150 Watts RMS
Frequency Response:
20Hz-20KHz +/-0.3dB
Total Harmonic Distortion:
Less than 0.05%
Input Impedance:
100K
Output Impedance:
10K
Size:
3.5"W x 1.25"H x 1.125"D
Weight:
0.5 lbs
The SPKCNV is designed to convert speaker level signals to line level signals in a simple, easy to use
package. Prepare the speaker level wires by stripping about 1/4" of insulation from each wire end. Twist the
strands tightly together so that none stick out to cause possible short circuits. Wire the unit following the
diagram below. Be sure to observe polarity!
Your AUDIOPLEX TECHNOLOGY SPKCNV is covered by a lifetime warranty against any defects in
workmanship and materials. Any defects will be remedied without charge for labor and parts.
Damage incurred by shipping or accident is not considered to be a defect, and not covered by this
warranty. AUDIOPLEX TECHNOLOGY is not responsible for defective operation caused by abuse or by
modification or service by any unauthorized person or agency.
The unit must be properly installed and operated according to instructions for the warranty to apply.
Any necessary servicing must be done by AUDIOPLEX TECHNOLOGY. The product must be returned
expenses prepaid, with written authorization from the company. The product must be shipped with the proof
of purchase and in the original carton and packing material to avoid damage.
This warranty gives you specific legal rights. You may have other rights which vary from state to state.
L+ L- R- R+
SOURCE AMPLIFIER
TO LINE LEVEL INPUT
WIRING DIAGRAM
TECHNOLOGY
INSTALLATION MANUAL
