7
Important
•
The electrical specifications of your home country must meet the
electrical specifications printed onto the back panel.
•
The EPX is a Class I unit and must be earthed. Please ensure a stable
earth connection. The Phase ('hot' pin) is marked '
PHASE
' on the
back panel for the mains input.
•
Never pull the mains plug while the EPX is switched on! Before you
pull the mains cord off the socket, power down the unit to stand-by
mode.
Only in cases of extended absence – like vacations – or if massive trouble
on the mains power is to be expected you should switch off the EPX from
the mains using the mains switch. To disconnect the unit completely from
mains pull the mains plug.
4.3 Connecting the mother unit
For the connection of the mother unit an EPX-cord with 5-pin or 7-pin
connector is needed. An overview can be found in the following table.
EPX -cord with
5-pin connector
EPX -cord with
7-pin connector
Image of the
connector
Mother unit
DNP, DNA, DNC,
PRE 1 G3
VIP, VIP G2, VIP G3
ART, ART V2,
ART G2, ART G3
PRE 1, PRE 1 G2
CAT
PAM, PAM V2,
PAM G2
MAP, MAP V2
MAP 1
Mains connection of
the mother unit
Needed
Not needed
Needed
Important
•
Do not connect mother devices equipped with 7-pin connectors (ex-
cept MAP, MAP V2, MAP I) to mains! This would compromise the
quality of audio performance. In this case (see table above) only use
one
mains cord to connect the EPX to mains, and no mains cord is
needed for the mother device.
