Audion D541, Руководство пользователя

Страница: 18 / 44

Operation 18
5 Operation
If necessary, put the plug in the socket.
The seal bar gets hot during use. Touching it can result in serious
burns.
5.1 Switching on the sealer
Switch on the sealer as follows:
5.1.1 Setting the sealing temperature
The sealing temperature is set as follows:
1. Press the
START
/
STOP
button for 1 sec.
If necessary, put the plug in the
socket.
During the start-up, the operating
settings are visible in the display.
To change these settings, please
refer to section 5.4.
1. Press the
ARROW
keys to increase or
reduce the sealing temperature.
The guideline value for the sealing
temperature is 100°C.
When the actual sealing
temperature is /- 5°C of
the set value, the temperature
indicator will stop blinking.