AUDIOLINE PMR 500, Руководство пользователя

Страница: 6 / 10

4
AUDIOLINE PMR500
VOLUME CONTROL
#
The audiable volume can be adjusted by pressing the VOL
•
and VOL
–
buttons.
#
You can select between a low (1) or high (8) volume setting. Display will show
current setting.
STANDBY MODE
If the PMR500 unit does not receive, transmit or no button has been pressed for more
than 10 seconds, the unit will return to stand-by mode. The STANDBY icon will begin
to flash.
Any button press, or incoming signal will switch the unit on.
MANUAL RECEVING MODE
Normally when another PMR 500 calls you, the receiving mode is activated automatically
and the conversation will be heard. If this doesn't work you can activate the receiving
mode manually by pressing the button for 5 seconds until a beep is heard. Press
again shortly to return to stand-by.
BACKLIT ON/OFF
Press the button shortly to toggle backlit on/off. In stand-by the light is off.
BATTERY LOW
The symbol will flash when the battery level is below operational limits.
ACCESORIES
Headset, carry bag and batteries can be purchased separately from your dealer.
DISTANCE
The maximum distance is depending on many factors in the ambient interior. The
radiowave that transfer the call meets many obstacles in the way. The obstacles can have
a reduce effect for the radiowave. The given distance assume that there is nothing
between the units. During those conditions the range can be up to XXX meters. Inside
houses etc the distance will be limited depending on walls, floor, etc.