Audiolab 9000CDT, Руководство пользователя

Страница: 8 / 18

12V Trigger Connection
Page 8
6: Connections
Coaxial and Optical Output
The 9000CDT offers one Coaxial and one Optical SPDIF digital
output. Connect a suitable Digital Coaxial (fully screened)
interconnect or Optical cable from the appropriate SPDIF
output of the 9000CDT to the input of a DAC or digital input
on your chosen amplifier or preamplifier.
Mains Input
Before connecting the AC power cord to the 9000CDT, please
make sure the Power Switch is in the OFF position. Switch it
to the ON position after connecting the unit to the AC mains.
The 9000CDT features two 12V trigger connections on the rear
panel. One is an input from your amplifier, and the other is a link
that can be used as an output to connect to other products such as
the wider 9000 series models. For the Audiolab 9000 series, this will
be a 3.5mm to 3.5mm interconnect.
AC220-240V~50/60Hz 22W
FUSE T630mAL 250V
USB Update
Follow the instructions provided separately with the official
Audiolab USB update files.
POWER OFF the 9000CDT unit. Insert the USB storage device, onto
which the USB update files have been loaded. Press the 'STANDBY'
button on the front panel then simultaneously POWER ON, your
9000CDT will upgrade automatically. Wait for the device display to
confirm that the update is completed. Then, unplug the USB drive
and restart the 9000CDT. The unit is now ready to use.
12V
TRIG
IN
LINK
DIGITAL
OUTPUT
OPT COAX
System Operations Menu Options Specifications Playing Operations
Important
Safety Information
Contents Getting Started Controls and Functions Remote Handset Warranty Coverage Connections