AudioCodes RXV100, Руководство по развертыванию, Страница: 19 / 40

Deployment Guide 2. RXV100 Components
Version N/A 19 RXV100
2.3 RX50
If the RXV100- B40 bundle is purchased, the RX50 is included. Developed in partnership with
Dolby®, the device serves as a peripheral speaker producing clear, natural-sounding voice
quality regardless of acoustic room design (wall contour and surface material). Full-room pickup
and dynamic leveling automatically increase the volume of quiet or distant voices, while
unwanted noise is filtered, ensuring every participant's voice is heard regardless of room shape,
size, or orientation within the room. Optional satellite microphone kit extending pickup reach by
2 meters/6.5 feet is available.

To connect the RX50:
1. Connect the RX50 to the network.
2. After connecting to the network, the RX50 automatically powers up via Power
over Ethernet (PoE) and establishes itself on the network.
2.3.1 Pairing the RX50 with the RXV100Hub
Pairing is automatically performed .

To set up automatic pairing, make sure:

RXV100Hub and RX50 are in the same network.
You’re notified ‘Pairing activated’:
View too the pairing icon in the top right corner and MTR Audio (instead of Offline ) in the
top left corner. After they’re paired, log in to the RXV100Hub as Administrator and set RX50 to
be its default audio device.
Note: It may take up to 90 seconds for the RXV100 and RX50 to show as paired after the
RXV100 or RX50 is rebooted.