AudioCodes MediaPack MP-114, Руководство пользователя

Страница: 48 / 164

User's Manual 48 Document #: LTRT-71405
MediaPack Series
6.4.1 Toolbar
The toolbar provides command buttons for quick-and-easy access to frequently required
commands. The toolbar buttons are described in the table below:
Description of Toolbar Buttons
Icon

Butto
n
Name
Description
Submit Applies parameter settings to the device (refer to Saving Configuration
Changes on page 55).
Note: This icon is grayed out when not applicable to the currently opened
page.
Burn Saves parameter settings to flash memory (refer to Saving Configuration
Changes on page 55).
-- Device
Actions
Opens a drop-down menu list with frequently needed commands:
Load Configuration File: Opens the 'Configuration File' page for loading
an ini file (refer to 'Restoring and Backing Up the device Configuration').
Save Configuration File: Opens the 'Configuration File' page for saving
the ini file to a PC (refer to 'Restoring and Backing Up the device
Configuration').
Reset: Opens the 'Maintenance Actions' page for resetting the device
(refer to Maintenance on page 122).
Restore Defaults: Opens the 'Configuration File' page for restoring the
parameters default values (refer to Restoring Networking Parameters to
their Default Values on page 18).
Software Upgrade Wizard: Opens the 'Software Upgrade Wizard' page
for upgrading the device's software (refer to Software Upgrade Wizard).
Switch Over: Opens the “High Availability Maintenance” page for
switching between Active and Redundant Boards (refer to High
Availability Maintenance).
Reset Redundant: Opens the "High Availability Maintenance" page for
resetting the Redundant Board (refer to High Availability Maintenance).
Home Opens the Home page (refer to Using the Home Page).
Help Opens the Online Help topic of the currently opened configuration page in
the Work pane (refer to Getting Help on page 58).
Log off Logs off a session with the Web interface (refer to Logging Off the Web
Interface on page 57).
Note: If you modify parameters that only take effect after a device reset, after
you click the Submit button, the toolbar displays the word "Reset" (in red color). This
is a reminder for you to later save ('burn') your settings to flash memory and reset
the device.