AudioCodes MediaPack MP-114, Руководство пользователя

Страница: 125 / 164

User's Manual 6. Configuration Using the Web Interface
Version 6.6 125 MediaPack Series
6.6.1.1.3 Saving Configuration
Changes made on the Web interface are volatile (in RAM). Changes to parameters with
on-the-fly capabilities are immediately available, while other parameters (preceded by the
lightning
symbol) are updated only after a device reset. Parameters that are only saved
to the volatile memory, revert to their previous settings after a power failure or hardware
reset.
To save changes so they are available after a power failure, you must save the changes to
the non-volatile memory (flash). When the configuration is saved, all parameters and
loaded files are saved to the non-volatile memory.

To save the changes to the non-volatile memory:
1. Open the 'Maintenance Actions' page (refer to Maintenance Actions on page 122).
2. Under the 'Save Configuration' group, click BURN; a confirmation message appears
when the configuration successfully saves.
Notes:
•
Saving configuration to the non-volatile memory may disrupt traffic on the
device. To avoid this, disable all new traffic before saving, by performing
a graceful lock (refer to Locking and Unlocking the Device on page 124).
•
Throughout the Web interface, parameters preceded by the lightning
symbol are not applied on-the-fly to the device and require that you reset
the device (refer to Resetting the Device on page 123) for them to take
effect.