AudioCodes Mediant 8000, Инструкция по установке, эксплуатации и обслуживанию

Страница: 365 / 924

Version 6.6 365 October 2014
Installation & Operation Manual 33. Configuring Security Settings
33.18.3 Administering the EMS User
The
ems
user is typically defined in a local CLI Users Database located on both the
SC boards, similar to the
root
user. This architecture ensures that the EMS server
may successfully connect to the Media Gateway even when the latter has no access
to the centralized authentication server.
The
ems
user should not be deleted and its password will never expire. The default
value of the
ems
user password on the Media Gateway matches the default value in
the EMS server (to simplify initial system configuration). Nevertheless, you should
change the password of the
ems
user prior to installing the Media Gateway in a
production environment.
33.18.3.1 Changing the Password of the EMS User
The password of the
ems
user on the Media Gateway should be changed periodically
for enhanced security.

To change the password of the EMS user:
1.
Connect to the CLI interface on the Active SC board. For more information, see
Section ''Command Line Interface' on page
107 .
2.
Login as
root
user. For more information, see Section 'Logging in as a Root User'
on page 115 .
3.
At the prompt, type
tools user
and press
Enter
. The CLI USERS
MANAGEMENT menu appears.
client238::~# tools user
CLI USERS MANAGEMENT
list -- LIST: list CLI users
add -- ADD: add user
del -- DELETE: delete user
pwd -- PASSWORD: change user password
copy -- COPY: copy users & passwords from other SC
lock -- LOCK: lock user
unlock—UNLOCK: unlock user
force -- FORCE: force user to change password
4.
At the
Choose submenu
prompt, type
pwd
and press
Enter
.
Choose submenu : pwd
CHANGE USER PASSWORD