CHAPTER 4 Mounting the Device
Mediant 500 Gateway & E-SBC | Hardware Installation Manual
➢
To mount the device on a pre-installed shelf in the rack:
1.
Before installing it in the rack, ensure that you have a pre-installed rack shelf on which the
device can be placed.
2.
Place the device on the pre-installed shelf in the rack.
Using Mounting Brackets
The procedure below describes how to mount the device in a 19-inch rack. Rack mounting involves
placing the device on a pre-installed rack shelf and then attaching the device's mounting brackets
to the device and rack frame. The purpose of the mounting brackets is to secure the device to the
rack.
Two mounting brackets are provided:
■
Left mounting bracket:
Figure 4-15: Left Mounting Bracket
■
Right mounting bracket with hole for looping through an optional cable tie (not supplied) for
securing cables:
Figure 4-16: Right Mounting Bracket
➢
To mount the device in a 19-inch rack using mounting brackets:
1.
Attach the two mounting brackets (supplied) to each side of the device's chassis, using the
supplied screws, as shown in the following figure:
Figure 4-17: Attaching the Mounting Brackets
- 12 -
