AudioCodes Mediant 500 MSBR, Руководство пользователя

Страница: 603 / 1248

Version 7.2 603 Mediant 500 MSBR
User's Manual 31. Analog Gateway
31.5 Configuring Automatic Dialing
The Automatic Dialing table lets you configure telephone numbers that are automatically
dialed when FXS or FXO ports go off-hook. The dialing can be done immediately upon off-
hook or after a user-defined interval after off-hook, referred to as
Hotline dialing. For
example, you can configure Hotline automatic dialing where if Port #1 remains off-hooked
for over 15 seconds, the device automatically dials 911.
The following procedure describes how to configure automatic dialing upon off-hook
through the Web interface. You can also configure it through ini file (TargetOfChannel) or
CLI (configure voip > gateway analog automatic-dialing).

To configure automatic dialing per port:
1. Open the Automatic Dialing table ( Setup menu > Signaling & Media tab > Gateway
folder > Analog Gateway > Automatic Dialing ).
2. Select the row corresponding to the port that you want to configure, and then click
Edit ; the following dialog box appears:
3. Configure automatic dialing per port according to the parameters described in the
table below.
4. Click Apply .
Table 31-2: Automatic Dialing Table Parameter Descriptions
Parameter Description
Index
[TargetOfChannel_Index]
(Read-only) Displays the index number of the table row.
Module
[TargetOfChannel_Modul
e]
(Read-only) Displays the module number on which the port is located.
Port
port
[TargetOfChannel_Port]
(Read-only) Displays the port number.
Port Type
[TargetOfChannel_PortT
ype]
(Read-only) Displays the port type (FXS or FXO).
Destination Phone Defines the destination telephone number to automatically dial.