AudioCodes Mediant 500 MSBR, Руководство пользователя, Страница: 250 / 1248

User's Manual 250 Document #: LTRT-10375
Mediant 500 MSBR
Start Time
start-time
[CostGroupTimebands_
StartTime]
Defines the day and time of day from when this time band is applicable.
The format is DDD:hh:mm, where:

DDD is the day of the week, represented by the first three letters of
the day in upper case (i.e., SUN, MON, TUE, WED, THU, FRI, or
SAT).

hh and mm denote the time of day, where hh is the hour (00-23) and
mm the minutes (00-59)
For example, SAT:22:00 denotes Saturday at 10 pm.
End Time
end-time
[CostGroupTimebands_
EndTime]
Defines the day and time of day until when this time band is applicable.
For a description of the valid values, see the parameter above.
Connection Cost
connection-cost
[CostGroupTimebands_
ConnectionCost]
Defines the call connection cost during the time band. This is added as a
fixed charge to the call.
The valid value range is 0-65533. The default is 0.
Note: The entered value must be a whole number (i.e., not a decimal).
Minute Cost
minute-cost
[CostGroupTimebands_
MinuteCost]
Defines the call cost per minute charge during the time band.
The valid value range is 0-65533. The default is 0.
Note: The entered value must be a whole number (i.e., not a decimal).
18.4.2.2 Assigning Cost Groups to Routing Rules
To use your configured Cost Groups, you need to assign them to routing rules:

Gateway application: Tel-to-IP Routing table - see Configuring Tel-to-IP Routing Rules
on page 495

SBC application: IP-to-IP Routing table - see Configuring SBC IP-to-IP Routing Rules
on page 671
18.5 Remote Web Services
This section describes configuration for remote Web services.
Note: To debug remote Web services, see Debugging Web Services on page 953.
18.5.1 Configuring Remote Web Services
The Remote Web Services table lets you configure up to seven Web-based (HTTP/S)
services provided by third-party, remote HTTP/S hosts. The following types of services can
be offered by the remote host:

Routing: Call routing service, whereby the remote host (e.g., routing server)
determines the next hop of an incoming call on the path to the final destination. For
more information on employing a third-party, remote routing server, see Centralized
Third-Party Routing Server on page 257.

Call Status: Call status of calls processed by the device. The call status is provided to