AudioCodes Mediant 500 E-SBC, Руководство пользователя

Страница: 624 / 920

User's Manual 624 Document #: LTRT-10437
Mediant 500 E-SBC
47.9 Viewing Registered SAS/SBC Users
You can view SAS and SBC users listed in the device's Users Registration database. The
list shows each Address of Record (AOR) and its corresponding contact. The contact's
registration status is also shown:

"Active status:1" indicates that the contact has been successfully registered and thus,
calls can be routed to it.

"Active status:0" indicates that the device has recently received a REGISTER request
from the contact, but the contact has yet to be registered. The device removes the
contact from the database if no response is received within a few seconds from the
proxy/registrar server.
An AOR is a SIP or SIPS URI that points to a domain with a location service that can map
the URI to another URI (contact) where the user might be available. A contact is a SIP URI
that can be used to contact that specific instance of the user agent for subsequent
requests.

To view registered SAS/SBC users in the Users Registration database:

Web: SAS/SBC Registered Users page ( Status & Diagnostics tab > VoIP Status
menu > SAS/SBC Registered Users ).
Figure 47-8: SAS/SBC Registered Users Page

CL I:
•
SBC users:
# show voip register db sbc list
•
SBC contacts of a specified AOR:
# show voip register db sbc user <Address Of Record>
•
SAS users:
# show voip register db sas list