AudioCodes Mediant 500 E-SBC, Руководство пользователя

Страница: 40 / 920

User's Manual 40 Document #: LTRT-10437
Mediant 500 E-SBC
6.1.4 Toolbar Description
The toolbar provides frequently required command buttons, described in the table below:
Table 6-2: Description of Toolbar Buttons
Icon Button
Name
Description
Submit Applies parameter settings to the device (see ''Saving Configuration''
on page 542 ).
Note: This icon is grayed out when not applicable to the currently
opened page.
Burn Saves parameter settings to flash memory (see ''Saving
Configuration'' on page
542 ).
Device
Actions
Opens a drop-down list with frequently needed commands:

Load Configuration File: Opens the Configuration File page for
loading an ini file to the device (see ''Backing Up and Loading
Configuration File'' on page 580 ).

Save Configuration File: Opens the Configuration File page for
saving the ini file to a folder on your PC (see ''Backing Up and
Loading Configuration File'' on page 580 ).

Reset: Opens the Maintenance Actions page for performing
various maintenance procedures such as resetting the device
(see ''Resetting the Device'' on page
539 ).

Software Upgrade Wizard: Starts the Software Upgrade Wizard
for upgrading the device's software (see ''Software Upgrade
Wizard'' on page
574 ).

Switch Over: Opens the High Availability Maintenance page for
switching between Active and Redundant devices (see High
Availability Maintenance on page
543 ).

Reset Redundant: Opens the High Availability Maintenance page
for resetting the Redundant device (see High Availability
Maintenance on page
543 ).
Home Opens the Home page (see ''Viewing the Home Page'' on page 51 ).
Help Opens the Online Help topic of the currently opened configuration
page (see ''Getting Help'' on page
50 ).
Log off Logs off a session with the Web interface (see ''Logging Off the Web
Interface'' on page 51 ).
- Reset If you modify a parameter on a page that takes effect only after a
device reset, after you click the
Submit button, the toolbar displays
"Reset". This is a reminder that you need to later save your settings
to flash memory and reset the device.