AudioCodes Mediant 4000 SBC, Руководство пользователя

Страница: 50 / 1037

CHAPTER 6 Web-Based Management
Mediant 4000 SBC | User's Manual
6 Web-Based Management
The device provides an embedded Web server (hereafter referred to as Web interface ), supporting
fault management, configuration, accounting, performance, and security (FCAPS). The Web
interface provides a user-friendly, graphical user interface (GUI), which can be accessed using any
standard Web browser. Access to the Web interface can be controlled by various security
mechanisms such as login username and password, read-write privileges, and limiting access to
specific IP addresses.
● The Web interface allows you to configure most of the device's settings. However,
additional configuration parameters may exist that are not available in the Web
interface and which can only be configured using other management tools.
● Some Web interface pages and parameters are available only for certain hardware
configurations or software features. The software features are determined by the
installed License Key (see
License Key ).
Getting Acquainted with the Web Interface
This section provides a description of the Web interface's graphical user interface (GUI).
Computer Requirements
The client computer accessing the device's Web interface requires the following prerequisites:
■ A network connection to the device.
■ One of the following Web browsers:
● Microsoft™ Internet Explorer™ (Version 11.0.13 or later)
● Mozilla Firefox® (Version 5.02 or later)
● Google Chrome (Version 50 or later)
The Web browser must be JavaScript-enabled.
■ Recommended screen resolutions: 1024 x 768 pixels, or 1280 x 1024 pixels.
Accessing the Web Interface
The following procedure describes how to access the Web interface.
➢
To access the Web interface:
1. Open a standard Web browser.
2. In the Web browser, enter the device's OAMP IP address (e.g., http://10.1.10.10); the Web
interface's Login window appears:
- 17 -