AudioCodes Mediant 4000 SBC, Руководство пользователя

Страница: 307 / 1037

CHAPTER 16 Services
Mediant 4000 SBC | User's Manual
Parameter Description
[UpstreamGroup_
LoadBalancingMode] ■ [0] Round Robin = (Default) Traffic requests are balanced across
all hosts. Every consecutive request is sent to the next available
host.
■ [1] IP Hash = All requests from a given client (by IP address) is
sent to the same host, regardless of current load.
■ [2] Least Connections = New requests are sent to the host with
the fewest active connections.
Note: The NGINX directive for this parameter is "ip-hash (1)", "least-
conn (2)", and "round-robin (0)".
Configuring Upstream Hosts
The Upstream Hosts table lets you configure up to 50 Upstream Hosts. The Upstream Hosts table
is a "child" of the Upstream Group table (see
Configuring Upstream Groups on page 272) and
therefore, Upstream Hosts are configured per Upstream Group. Up to 5 Upstream Hosts can be
configured per Upstream Group.
The following procedure describes how to configure Upstream Hosts through the Web interface.
You can also configure it through ini file [UpstreamHost] or CLI (
configure network > http-
proxy > upstream-host
).
➢
To configure an Upstream Host:
1. Open the Upstream Groups table (Setup menu > IP Network tab > HTTP Proxy folder >
Upstream Groups ).
2. In the table, select the required Upstream Group index row, and then click the Upstream
Hosts link located below the table; the Upstream Hosts table appears.
3. Click New ; the following dialog box appears:
4. Configure an Upstream Host according to the parameters described in the table below.
5. Click Apply , and then save your settings to flash memory.
Table 16-24:Upstream Hosts Table Parameter Descriptions
Parameter Description
'Index'
[UpstreamHost_HostIndex]
Defines an index number for the new table row.
Note:
■ Each row must be configured with a unique index.
■ The parameter is mandatory.
- 274 -