AudioCodes Mediant 2000, Руководство пользователя

Страница: 48 / 418

SIP User's Manual 48 Document #: LTRT-68808
Mediant 2000
2.
From the shortcut menu, choose
Update Port Info
; a text box appears.
Figure 3-28: Entering the Port Name
3.
Type a brief description for the port, and then click
Apply Port Info
.
3.3.8.2 Viewing Trunk Settings
The 'Home' page allows you to view the settings of a selected port in the 'Trunk Settings'
screen. Accessing this screen from the Home page provides an alternative to accessing it
from the
Advanced Configuration
menu (refer to ''Configuring the Trunk Settings'' on page
82 ).
¾
To view port settings, take these 2 steps:
1.
On the 'Home' page, click a desired trunk port LED on the TP-1610 (labeled as items
#3 and #5 in the figure in Accessing the Home Page); a shortcut menu appears.
2.
From the shortcut menu, choose
Port Settings
; the 'Trunk Settings' screen opens.
3.3.8.3 Switching Between Modules
The device can house up to two modules, as discussed in previous sections. Since each
module is a standalone gateway, the 'Home' page displays only one of the modules to
which you are connected. However, you can easily switch to the second module, by having
the Web browser connect to the IP address of the other module.
¾
To switch modules, take these 3 steps:
1.
In the 'Home' page, click anywhere on the module to which you want to switch, as
shown below:
Figure 3-29: Click Module to which you want to Switch
A confirmation message box appears requesting you to confirm switching of modules.