AudioCodes Mediant 2000, Руководство пользователя

Страница: 39 / 418

Version 5.6 39 November 2008
SIP User's Manual 3. Web-Based Management
3.
Click the
Get Scenario File
button; the 'File Download' window appears.
4.
Click
Save
, and then in the 'Save As' window navigate to the folder to where you want
to save the Scenario file. When the file is successfully downloaded to your PC, the
'Download Complete' window appears.
5.
Click
Close
to close the 'Download Complete' window.
3.3.5.5 Loading a Scenario to the Device
Instead of creating a Scenario, you can load a Scenario file (
data
file) from your PC to the
device.
¾
To load a Scenario to the device, take these 4 steps:
1.
On the Navigation bar, click the
Scenarios
tab; the Scenario appears in the Navigation
tree.
2.
Click the
Get/Send Scenario File
button (located at the bottom of the Navigation tree);
the 'Scenario File' page appears (refer to ''Saving a Scenario to a PC'' on page 38 ).
3.
Click the
Browse
button, and then navigate to the Scenario file stored on your PC.
4.
Click the
Send File
button.
Notes:
•
You can only load a Scenario file to a device that has an identical
hardware configuration setup to the device in which it was created. For
example, if the Scenario was created in a device with FXS interfaces, the
Scenario cannot be loaded to a device that does not have FXS
interfaces.
•
The loaded Scenario replaces any existing Scenario.
•
You can also load a Scenario file using BootP, by loading an
ini
file that
contains the
ini
file parameter ScenarioFileName (refer to ''Web and
Telnet Parameters'' on page 273 ). The Scenario
dat
file must be located
in the same folder as the
ini
file. For a detailed description on BootP, refer
to the
Product Reference Manual
.