AudioCodes Mediant 2000, Руководство пользователя, Страница: 325 / 418

Version 5.6 325 November 2008
SIP User's Manual 4. ini File Configuration
4.4.13 Channel Parameters
The channel-related
ini
file configuration parameters are described in the table below. The
channel parameters define the DTMF, fax and modem transfer modes.
Table 4-13: Channel ini File Parameters
Parameter Description
DJBufMinDelay
For a description of this parameter, refer to ''Configuring the RTP /
RTCP Settings'' on page
71 .
DJBufOptFactor
For a description of this parameter, refer to ''Configuring the RTP /
RTCP Settings'' on page
71 .
FaxTransportMode
For a description of this parameter, refer to ''Configuring the Fax /
Modem / CID Settings'' on page
67 .
FaxRelayEnhancedRedunda
ncyDepth
For a description of this parameter, refer to ''Configuring the Fax /
Modem / CID Settings'' on page
67 .
FaxRelayRedundancyDepth
For a description of this parameter, refer to ''Configuring the Fax /
Modem / CID Settings'' on page
67 .
FaxRelayMaxRate
For a description of this parameter, refer to ''Configuring the Fax /
Modem / CID Settings'' on page
67 .
FaxRelayECMEnable
For a description of this parameter, refer to ''Configuring the Fax /
Modem / CID Settings'' on page
67 .
FaxModemBypassCoderType
For a description of this parameter, refer to ''Configuring the Fax /
Modem / CID Settings'' on page
67 .
CNGDetectorMode
For a description of this parameter, refer to ''Configuring the Fax /
Modem / CID Settings'' on page
67 .
FaxCNGMode
For a description of this parameter, refer to ''Configuring the Fax /
Modem / CID Settings'' on page
67 .
FaxModemBypassM
For a description of this parameter, refer to ''Configuring the Fax /
Modem / CID Settings'' on page
67 .
FaxModemNTEMode
Determines whether the device sends RFC 2833 ANS/ANSam
events upon detection of fax and/or modem answer tones (i.e.,
CED tone).
ƒ
[0]
= Disabled (default).
ƒ
[1]
= Enabled.
Note:
This parameter is applicable only when the fax or modem
transport type is set to bypass or Transparent-with-Events.
FaxBypassPayloadType
For a description of this parameter, refer to ''Configuring the RTP /
RTCP Settings'' on page
71 .
CallerIDTransportType
For a description of this parameter, refer to ''Configuring the Fax /
Modem / CID Settings'' on page
67 .
ModemBypassPayloadType
Modem Bypass dynamic payload type.
The range is 0-127. The default value is 103.
FaxModemRelayVolume
Determines the fax gain control.
The range -18 to -3 corresponds to -18 dBm to -3 dBm in 1-dB
steps. The default is -6 dBm fax gain control.