AudioCodes Mediant 2000, Руководство пользователя

Страница: 243 / 418

Version 5.6 243 November 2008
SIP User's Manual 3. Web-Based Management
The displayed logged messages are color coded as follows:
•
Yellow - fatal error message
•
Blue - recoverable error message (i.e., non-fatal error)
•
Black - notice message
3.
To clear the page of Syslog messages, in the Navigation tree, click the page item
Message Log
again; the page is cleared and new messages begin appearing.
¾
To stop the Message Log, take this step:
„ Close the page by accessing any another page in the Web interface.
3.6.1.2 Viewing the Ethernet Port Information
The 'Ethernet Port Information' page displays read-only information on the Ethernet
connection used by the device. This includes indicating the active port, duplex mode, and
speed. You can also access this page from the 'Home' page (refer to ''Using the Home
Page'' on page
46 ).
For detailed information on the Ethernet redundancy scheme, refer to ''Ethernet Interface
Redundancy'' on page
380 . For detailed information on the Ethernet interface configuration,
refer to ''Ethernet Interface Configuration'' on page 379 .
¾
To view Ethernet port information, take the following step:
„ Open the ‘Ethernet Port Information’ page (
Status & Diagnostics
tab >
Status &
Diagnostics
menu >
Ethernet Port Information
page item).
Figure 3-110: Ethernet Port Information Page
Table 3-62: Ethernet Port Information Parameters
Parameter Description
Active Port Displays the active Ethernet port (1 or 2).
Port Duplex Mode Displays the Duplex mode of the Ethernet port (Half Duplex or Full Duplex).
Port Speed Displays the speed (in Mbps) of the Ethernet port (10 Mbps; 100 Mbps).