AudioCodes Media Pack MP-11x, Руководство пользователя

Страница: 69 / 650

Version 6.6 69 MP-11x & MP-124
User's Manual 4. Web-Based Management
4.3.2 Advanced User Accounts Configuration
This section describes advanced Web user account configuration. This is relevant if you
need the following management scheme:

Enhanced security settings per Web user (e.g., limit session duration)

More than two Web user accounts (up to 5 Web user accounts)

Master users
This advanced Web user configuration is done in the Web Users table, which is initially
accessed from the Web User Accounts page (see procedure below). Once this table is
accessed, subsequent access immediately opens the Web Users table instead of the Web
User Accounts page.
Notes:
•
Only the Security Administrator user can initially access the Web Users table.
•
Only Security Administrator and Master users can add, edit, or delete users.
•
Admin users have read-only privileges in the Web Users table. Monitor users have
no access to this page.
•
If you delete a user who is currently in an active Web session, the user is
immediately logged off by the device.
•
All users can change their own passwords. This is done in the WEB Security
Settings page (see 'Configuring Web Security Settings' on page
73 ).
•
To remove the Web Users table and revert to the Web User Accounts page with
the pre-configured, default Web user accounts, set the ResetWebPassword
ini file
parameter to 1. This also deletes all other Web users.
•
Once the Web Users table is accessed, Monitor users and Admin users can only
change their passwords in the Web Security Settings page (see 'Configuring Web
Security Settings' on page
73 ). The new password must have at least four different
characters than the previous password. (The Security Administrator users and
Master users can change their passwords in the Web Users table and in the Web
Security Settings page.)
•
This table can only be configured using the Web interface.

To add Web user accounts with advanced settings:
1. Open the Web Users Table page:
•
Upon initial access:
a. Open the Web User Accounts page ( Configuration tab > System menu >
Web User Accounts ).
b. Under the Web Users Table group, click the Create Table button.
•
Subsequent access: Configuration tab > System menu > Web User Accounts .
The Web Users table appears, listing the two default, pre-configured Web use
accounts - Security Administrator ("Admin") and Monitor ("User"):
Figure 4-30: Web Users Table Page